Caliper plate for 320mm rotor, 2007/earlier forks, using SV cali

Want to fit a 320mm front brake disk to your 2007 and earlier KLR650? Here is a proper fitting stainless caliper plate. You'll need to use decent shop practice to install, but it's not hard. You'll use simple shop tools and some loctite. Allow about an hour for mounting both the 320 rotor to the hub and installing this caliper plate. This was fit checked with and EBC rotor, but should also work with Galfer. Supplied with mounting bolts needed. You will need to ream/drill out the threads in the SV caliper plate so the mounting bolts go through

 

  • Item #: 320SV07
  • Manufacturer: Eagle Mfg & Eng

Caliper plate for 320mm rotor, 2007/earlier forks, using SV cali

Price: $49.95
* Marked fields are required.
Availability: In-Stock
Qty: *